Light Commercial Hopper Stokers
Available in feed rate sizes from 50 to 75lbs. of coal per hour, the Hopper Model Stokers feature an easy to install Windbox type burner. The smaller capacity hopper is built with a heavy steel base for long life. A single motor drives both the gear transmission and blower fan.
Specifications
| Models | Feed Rate | BTU/Hour | Retort | Weight |
| S50 | 50 lbs. | 390,000 | Round | 360 lbs. |
| S65 | 65 lbs. | 507,000 | Round | 360 lbs. |
| S70 | 75 lbs. | 585,000 | Rectangular | 425 lbs. |
NOTE: Basic information is shown above. For complete information, refer to dimensional drawings. Stoker Length – Available in 12″, 24″ and 36″ longer than standard. * Phase – special motors available. Not for anthracite coal.
Residential Hopper Stokers
Available in feed rate size to 30lbs. of coal per hour, the Residential Hopper Model Stoker features an easy to install Windbox type burner. The fully enclosed hopper is built with a heavy steel base for long life. A single motor drives both the gear transmission and blower fan.
Features
- Continuous Gear Driven Transmission
Rugged in construction, extremely simple in design and operation – has been tried and proven over a period of many years. All Residential & Light Commercial models are furnished with this standard transmission, single end shaft motors and 3-speed pulleys for easy coal-feed adjustments. Gears are made of special alloy. Shear pin for positive protection of all parts. - Heavy Duty Screw Conveyor
The conveyor screw is made of high carbon steel, making it highly resistant to abrasion and wear. - Sectional Tuyeres
Tuyeres in all burner heads are built in sections to allow for expansion and contraction. - Heavy Duty Motor
Thoroughly tested and proven by engineers for high starting power and extra years of trouble free performance. No radio or television interference. - Extended Windbox
Makes it easy to clean out siftings underneath the tuyeres.
Specifications
| Model | Feed Rate | BTU/Hour | Boiler HP | Motor HP | Hopper Capacity | Weight |
| S30 | 30 lbs. | 234,000 | 7.0 | 1/4 | 600 | 360 lbs. |
Not for anthracite coal.